Speed control, Using speed control, Setting speed control – Lincoln 2010 MKZ User Manual

Page 77: Driver controls

Advertising
background image

Memory feature
The power side view mirror positions are saved when doing a memory
set and can be recalled using the memory feature. Refer to Memory seat
and mirrors
in the Seating and Safety Restraints chapter.

Heated mirrors
Both mirrors are heated automatically to remove ice, mist and fog when
the rear window defrost is activated.
Note: With the auto dimming feature, the mirror glass is thicker and will
take longer to defrost.
Do not remove ice from the mirrors with a scraper or attempt to
readjust the mirror glass if it is frozen in place. These actions
could cause damage to the glass and mirrors.
Blind spot mirrors (if equipped)
Your vehicle may be equipped with blind spot information mirrors. See
Blind spot information system (BLIS

) with cross traffic alert (CTA)

in the Driving section.
SPEED CONTROL
With speed control set, you can maintain a set speed without keeping
your foot on the accelerator pedal.

WARNING: Do not use the speed control in heavy traffic or on
roads that are winding, slippery or unpaved.

Using speed control
The speed controls are located on the steering wheel. The following
buttons work with speed control:

RESUME: Press to resume a set
speed.

SET +: Press to increase the set
speed.

SET – : Press to decrease the set
speed.

OFF/ON: Press to turn speed
control off or on.

Setting speed control
To set speed control:
1. Press and release ON.

Driver Controls

77

2010 MKZ (378)
Owners Guide, 3rd Printing
USA
(fus)

Advertising