Loewe Viewvision DR+DVB-T - Manual (Page 24)

- 4
The General Menu
Automatic programming
This recorder is equipped with a receiver (tuner) which can receive a maximum 88
analogue and 165 digital channels.
➠ When using Digital Link Plus the analogue station list is adapted to the TV
set (on this page).
➠ Connect the recorder to the aerial system (page 16).
Call menu.
5
6 Select General symbol.
4 Call second level.
5 6 Select Auto Programming.
4 Mark country option.
5 6 Select Country.
4 Press.
5 6 Select Analogue, DVB-T or DVB-T+Analogue.
Start channel search.
The tuner runs through all the available channels automatically
and transfers the found stations to the tuner memory.
OK
Stop
Search 20 %
DVB-T+Analogue
Others Auto Programming
Program Edit
Clock Set
TV Aspect
AV2 Connection
Video output format
Power Save Mode
Antenna Feed 5V
Initialization
 Prev. Select
Digital Link Plus
If you have connected the recorder to a Loewe TV set with Digital Link Plus or a
comparable system of another make (e.g. EasyLink, Mega Logic, Project 50), the
analogue station list will be transferred from the TV to the recorder. This happens
when you log in the recorder on the TV set or when you change (resort, delete,
add new ones) the analogue stations on the TV set. After such a change, the TV
will prompt you to start transfer of the changed analogue station list.
The recorder detects a connected TV set with Digital Link Plus or a comparable
system of a different make and sets the recorder accordingly. Then you can no
longer search for, delete or sort TV stations on the recorder. The menu items are
displayed in grey. Please note that all analogue stations which you receive via
antenna or cable have to be saved on station slots 1 to 88 in the TV set. If the
TV set does not prompt you to transfer the analogue station data, start transfer
on the recorder.
Please only make all the changes to the analogue stations on the TV set when
your TV set is equipped with Digital Link Plus or with a comparable system of
another make.
If your TV set to which you have connected the recorder does not have Digital Link
Plus or a comparable system, you should match up the analogue stations lists of
the recorder and the TV set. This makes it easier for you to find the channels on
the TV set and the recorder.
➠ Connect the recorder to the TV set with Digital Link Plus with a SCART con-
nection (page 16).
➠ If the recorder has taken over the analogue stations from a Loewe TV via
Digital Link Plus (DLP), the functions Block, Program Edit, Move and Delete
are locked and cannot be used again until the analogue stations have been
overwritten again by automatic programming.
➠ When „France“ is selected as the country and „DVB-T“ is selected as the TV
standard, the VHF bandwidth for DVB-T can be set between 7 and 8 MHz
with the blue colour key.
Transfer analouge station list
Call menu.
5
6 Select General symbol.
4 Call second level.
5 6 Select Auto Programming.
4 Press  times.
5 6 Select DLP.
4 Press. The Start button is marked.
OK
Others
DLP
Start
Auto Programming
Program Edit
Clock Set
TV Aspect
AV2 Connection
Video output format
Power Save Mode
Antenna Feed 5V
Initialization
 Prev. Select
Start transfer of the analogue stations list from the TV to the
recorder.
This may last a few seconds. The display on the recorder shows
DLP during the transfer.
➠ (Viewvision DR+ DVB-T Secam). French analogue stations will only be trans-
ferred in the correct standard with Digital Link Plus if you select France as
the country (see above) first.
Initial Installation