Linn LS500 User Manual
Page 13
Advertising
11
CONNECTION
Connection of the loudspeaker to the amplifier should be made with good
quality cable. Linn K600 series cable is ideal for tri-wiring. The leads should
be terminated with the connectors supplied. These ensure optimum contact
and the use of other connectors could degrade the signal.
All Linn cable is marked with the Linn symbol to indicate directionality. The
end marked with the circular Linn symbol should point to the loudspeakers,
and the other to the amplifier.
Take care to observe the correct polarity. The red socket is positive and the
black is negative. The positive wire is identified by a rib along the side of the
cable.
Your Linn retailer can supply you with properly made cables of a suitable
length.
LOUDSPEAKERS
AMPLIFIER
Advertising