Linn LS500 User Manual

Page 14

Advertising
background image

12

POSITIONING

KABER speakers have been designed to perform best when placed close to
a wall. Ideally the rear of the loudspeaker should between 4" and 12" (10 cm
and 30 cm) from the wall, and at least 18" (45 cm) from any corner.

The distance between the loudspeaker and your normal listening position
should form part of an equilateral triangle. They also benefit from being
angled inwards slightly by between 5 and 10 degrees.

These are general guidelines and a little experimentation with position and
angle can optimise results for a particular listening room.

CAUTION

The spikes are sharp and you should take care when moving the

speakers.

Once you have determined the final position of your KABERS, check for any
rocking movement, adjusting the appropriate spike/s until complete stability
is achieved. Tighten all locknuts, taking care not to alter the positioning of the
spikes.

MAINTENANCE

The Linn KABERs normally need no maintenance, other than occasionally
polishing the cabinet with a soft, slightly damp cloth. Take care not to touch
the drive units behind the grille cloth. If you have to transport your speakers,
remove the spikes and use the original packing. Your retailer can provide
packing if necessary.

Advertising