Line 6 headphones powered monitors - Manual

headphones powered monitors
or mixer/amp
& monitors
computer
USB
recording sources
computer
USB
guitar/bass
Analog Outs:
These give the
ToneDirect™
Monitoring magic.
Connect to other
inputs on your
recording interface
and enable its
direct analog
monitoring of these
— NOT monitoring
“through” the
recording
application!
Or connect them to
your mixer for
monitoring.
MORE INFO
DI Out: This will be the source to
run the plug-in on. Connect to an input
on your audio interface and choose as
the input for the track with the GearBox
Plug-in. Mute recording application’s
monitoring of this track input.
TonePort DI’s outputs feed 3 separate inputs on your recording interface
Got different Line 6 hardware? MORE INFO
Line Outs
Phones Out
Analog Outs DI Out
IMPORTANT:
Connect Speakers or
Headphones to Line 6
hardware, not directly
to computer.
Hardware Unit
We don’t recommend hooking a TonePort or GuitarPort
to the input of a guitar amp. Still want to attempt this?
MORE INFO
www.line6.com/store
Want to hear your computer’s internal soundcard and
GearBox sound through the same set of speakers?
MORE INFO
Add plug-in operation to your GearBox setup to
enjoy the same Models you already own — including
any Model Packs you’ve added on — now operating
in GearBox Plug-In mode! It’s all just a click away:
Optional ToneDirect™ Monitoring:
For no-compromise feel & responsiveness during
recording, you can send unprocessed audio to
your recording program, but monitor it instantly
through the TonePort DI’s analog outputs.
To enjoy it, connect audio and run the
separate GearBox program alongside
your recording program and plug-ins.
A typical setup for ToneDirect™ Monitoring
TonePort DI alongside a second recording interface
is shown below. MORE INFO
Line 6 hardware must also be connected via USB.
Part of GearBox
Plug-In Bundles.
Can be added to any
GearBox supported
hardware.
Can run with any
TonePort, GuitarPort
or POD XT .
USB REQUIRED:
Line 6 hardware
must be connected
via USB to use
GearBox Plug-In.
ADDING PLUG-IN
OPERATION
Your Recording Interface