Lincoln Electric INVERTEC V350-PRO IM708 - Manual (Page 31)

F-6 DIAGRAMS F-6
V350-PRO (CE)
Only qualified persons should install, use or service this machine. using the disconnect switch at the fuse box
WARNING
Turn off input power to the Welding Power Source
Before connecting the wire feeder.
ELECTRIC
SHOCK
CAN KILL
N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION. N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF", REVERSE ELECTRODE AND WORK CABLE AT POWER SOURCE.
ELECTRODE CABLE TO LN-7 TO WORK
- +
14 PIN AMPHENOL
LN-7 CONTROL BOX
POWER SOURCE INVERTEC
K864
K480-7 INPUT CABLE
14 PIN AMPHENOL
K857 REMOTE CONTROL K963 HAND AMPTROL K870 FOOT AMPTROL
N.C. K480-7 INPUT CABLE CAN BE CONNECTED DIRECTLY IF REMOTE CONTROL IS NOT REQUIRED.
6 PIN AMPHENOL
ADAPTER
OR OR
N.D. K864 ADAPTER CANNOT BE USED WITH AN LN-25.
WITH 115VAC AUXILIARY POWER
S19901
4-19-96D
K864 ADAPTER TO LN-7 & REMOTE CONTROL - CONNECTION DIAGRAM