Lenoxx Electronics DVD-1002 - Manual (Page 12)

IB-DVD1002 (AT)-WM-E-032706
INITIAL SETTING
11
1
In STOP mode, press the SETUP button on the
remote control, a SETUP menu like this will appear
on the TV screen.
4
When the setting has been finished, press the
SETUP button to exit the SETUP mode.
For the first time use, you may need to set some of the settings and adjustments according to your
TV and favorite preferences, but most people will not adjust the following functions and
will go directly to Page 15 for basic play.
You can adjust the SYSTEM SETUP, LANGUAGE SETUP, AUDIO SETUP and VIDEO SETUP in
the menu by following the steps below.
3
Press the OK button to confirm your selection.
2
Use these / / / buttons to highlight your
selection.
A B
TO SET PRESS
TO QU IT PRE SS
THE N
SET UP
OK
SYSTEM SETUP
TV SYSTEM
TV TYPE
SLEEP CONTROL
DEFAULT
EXIT SETUP
4:3 PS
NTSC
OFF
RESTORE
SYSTEM SETUP (TV SYSTEM, SLEEP CONTROL, TV TYPE & DEFAULT)
Setting the TV SYSTEM
This allows you to fall asleep to a movie or music disc and the DVD player will stop itself at a
set time.
Setting the SLEEP CONTROL
1
In STOP mode, press the SETUP button on the
remote control, “
” (System Setup) is selected.
2
Press button to highlight “TV SYSTEM”.
3
Press button and use / buttons to highlight
your preferred option.
4
Press the OK button to confirm.
5
Press the SETUP button to exit the SETUP mode.
1
In STOP mode, press the SETUP button on the
remote control, “
” (System Setup) is selected.
2
Press button and use button to highlight
“SLEEP CONTROL”.
3
Press button and use / buttons to highlight
your preferred option.
4
Press the OK button to confirm.
5
Press the SETUP button to exit the SETUP mode.
NOTE: When the selected sleep time is reached after play, the system will go into STANDBY
mode.
- NTSC
A USA video standard. If your TV is NTSC system, select this mode.
- PAL
A video standard in Europe. If the connected TV is PAL system, select this mode.
- AUTO
If the connected TV is multi-system, select this mode. The output format will be in accordance
with the video signal of the disc.
A B
TO SET PRESS
TO QU IT PRE SS
THE N
SET UP
OK
PAL
AUTO
NTSC
SYSTEM SETUP
TV SYSTEM
TV TYPE
SLEEP CONTROL
DEFAULT
EXIT SETUP
A B
TO SET PRESS
TO QU IT PRE SS
THE N
SET UP
OK
SYSTEM SETUP
TV SYSTEM
TV TYPE
SLEEP CONTROL
DEFAULT
EXIT SETUP
OFF
120 MIN
90 MIN
60 MIN
45 MIN
30 MIN
15 MIN
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM 12