Lenoxx Electronics DVD-1002 - Manual (Page 15)

IB-DVD1002 (AT)-WM-E-032706
INITIAL SETTING
14
VIDEO SETUP (VIDEO OUT)
1
In STOP mode, press the SETUP button on the
remote control, “
” (System Setup) is selected.
2
Use button to highlight “ ” (Video Setup).
3
Press button to highlight “VIDEO OUT”.
4
Press button and use / buttons to select
“YUV” or “S-VIDEO”.
5
Press the OK button to confirm.
6
Press the SETUP button to exit the SETUP mode.
TO SET PRESS
TO QU IT PRE SS
THE N
SET UP
OK
A B
S-VIDEO
YUV
VIDEO SETUP
VIDEO OUT
EXIT SETUP
Setting the Downmix Audio Out
1
In STOP mode, press the SETUP button on the
remote control, “
” (System Setup) is selected.
2
Use button to highlight “ ” (Audio Setup).
3
Press button and use button to highlight
“DOWNMIX”.
4
Press button and use / buttons to select
“LT/RT” or “STEREO”.
5
Press the OK button to confirm.
6
Press the SETUP button to exit the SETUP mode.
TO SET PRESS
TO QU IT PRE SS
THE N
SET UP
OK
A B
LT/RT
AUDIO SETUP
DIGITAL OUT
STEREO
EXIT SETUP
DOWNMIX
Downmix audio output setup allows you to select LT/RT or STEREO audio output mode.
- LT/RT
Select this item when the disc supporting Pro Logic Dolby Stereo is played. You have the
opportunity to hear a program’s soundtrack in the most accurate and realistic presentation
possible.
- STEREO
For 5-channel output, the left and right track signals are output simultaneously; For 2-channel
output, the ordinary stereo signal is output.
NOTE 1: YUV is a superior video standard. It can optimize the translation of the Video, Y
means Luminance, U and V mean chrominance.
NOTE 2: If sound does not come out of your TV, try using other AUDIO INPUT jacks near the
Video jacks and make sure jacks are plugged in.
If the video connection is Normal or S-Video, please set the Video Output to S-VIDEO; If you
want to use the Component Video connection or Progressive Scan video (see page 4), please
set the Video Output to YUV mode.
IB-DVD1002(AT)-WM-E-032706.pmd 7/5/2006, 10:24 AM 15