Initial setting, Audio setup – Lenoxx Electronics DVD-1002 User Manual

Page 14

Advertising
background image

IB-DVD1002 (AT)-WM-E-032706

INITIAL SETTING

13

LANGUAGE SETUP (On Screen Display, AUDIO, SUBTITLE & MENU)

These items allow you to preset the OSD language (OSD = On Screen Display), audio language,
subtitle language, and menu language that will always be used for every disc (the language selected
is available).

NOTE 1: If the language selected is not available on the disc, the original language designated

by each disc will be selected.

NOTE 2: You can change the AUDIO or SUBTITLE language easily by pressing the AUDIO or

SUBTITLE button on the remote control (refer to page 19).

1

In STOP mode, press the SETUP button on the
remote control, “

” (System Setup) is selected.

2

Use button to highlight “

A B

” (Language Setup).

3

Press button and use / buttons to highlight
the item which you want to change.

4

Press button and use / buttons to select
your preferred language.

5

Press the OK button to confirm.

6

Press the SETUP button to exit the SETUP mode.

TO SET PRESS

TO QU IT PRE SS

THE N

SET UP

OK

A B

OSD LANGUAGE

AUDIO LANG

SUBTITLE LANG
MENU LANG

SPANISH

ENGLISH

FRENCH

LANGUAGE SETUP

EXIT SETUP

AUDIO SETUP

- RAW
The coaxial output on the rear panel is connected with a receiver that accepts Dolby
Digital, MPEG or other signals. It works for most of the coaxial connections.

- PCM
The coaxial output on the rear panel is connected with a receiver that accepts PCM SIGNALS.

Setting the Digital Audio Out (Only for use in COAXIAL connection mode)

Your DVD player can be connected to a home cinema system with coaxial digital audio jack to
realize high quality sound effects, digital audio output allows you to select RAW or PCM digital
signal.

1

In STOP mode, press the SETUP button on the
remote control, “

” (System Setup) is selected.

2

Use button to highlight “

” (Audio Setup).

3

Press button to highlight “DIGITAL OUT”.

4

Press button and use / buttons to select
“RAW” or “PCM”.

5

Press the OK button to confirm.

6

Press the SETUP button to exit the SETUP mode.

TO SET PRESS

TO QU IT PRE SS

THE N

SET UP

OK

A B

RAW

AUDIO SETUP

DIGITAL OUT

PCM

EXIT SETUP

DOWNMIX

IB-DVD1002(AT)-WM-E-032706.pmd

7/5/2006, 10:24 AM

14

Advertising