Linear HTS-ES1 - Manual (Page 7)

7
Equalizer (EQ):
Press the EQ button to choose between preset
equalizer settings: Classic, Rock, Pop, Jazz and
Off.
Note: Visual confirmation of EQ setting does not
appear in the unit's display area, but will appear
in the optional monitor’s display (if installed).
ENTER
MENU
USB MIC VOL 1 MIC VOL 2 MIC 1 MIC 2 ECHO
BAND
OPEN/
CLOSE
MODE SCAN
MUTE MIC
®
EQ
DVD
Mute:
Press the MUTE button to mute the audio.
“MUTE” will appear in the display. Press again to
restore the audio level.
ENTER
MENU
USB MIC VOL 1 MIC VOL 2 MIC 1 MIC 2 ECHO
BAND
OPEN/
CLOSE
MODE SCAN
MUTE MIC
®
EQ
DVD
Sound Controls (Continued)
Speaker Output Adjustment Control:
1. Select the desired speaker by pressing the
VOLUME knob. The speakers will be displayed
in the following order: bAS (Bass), trE
(Treble), L F (left front speaker), r F (right
front speaker), L r (left rear speaker), r r (right
rear speaker), CEn (center speaker) and SUb
(Subwoofer).
2. Use the volume knob to adjust the speaker to
the desired output.
3. Wait 10 seconds for the unit to revert to the
previous mode or select another speaker by
pressing the VOLUME knob again.
VOL 2 MIC 2 ECHO AUX IN
SPEAKERS A B A+B
VOLUME +
MIC VOL 2 MIC 2 ECHO AUX IN
SPEAKERS A B A+B
VOLUME
+
Decrease Increase
HTS-ES1-UM1 (First Lot).qxp 2/7/08 2:29 PM Page 7