Linear HTS-ES1 - Manual (Page 9)

AM/FM Operation (Continued)
Manually Storing Radio Stations:
1. Press the BAND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Tune-in the desired radio station.
3. Press and hold anyone of the station recall
buttons on the remote (Buttons 1-6) until the
display begins to flash and memorizes the
station.
AUDIO
AS/PS
ELAPSE
BAND EQ SUB.TT
MENU 1 2 3
5 6 7 4
9 10/0 10 + 8
SLOW
Radio Station
Recall Buttons
(Buttons 1-6)
9
Automatically Store Radio Stations:
1. Press the BAND button to select either the
AM1 or AM 2 band to automatically store AM
Stations. Or press the BAND button to select
either the FM1, FM2 or FM3 radio band to
automatically store FM Stations.
2. Press and hold the AS/PS button and the tuner
will search for the strongest stations and store
them into memory. 6 stations will be stored into
each the AM1 and AM 2 bands, or the FM1,
FM2 and FM3 bands.These new stations will
replace stations that were previously stored.
3. After the new stations are stored into memory
the tuner will start playing stored station 1.
Scanning Stored Radio Stations:
1. Press the BAND button to select either the
AM1, AM2, F1, F2 or F3 radio band.
2. Press the AS/PS button and the tuner will
scan the stored stations in the current band
and pause for 5 seconds at each station.
When a desired station is reached, press the
AS/PS button again to stop the scan and that
station will begin playing.
AUDIO
RANDOM REPEAT
ZOOM SETUP VOL
TONE
ENTER
+
AS/PS
ELAPSE
BAND EQ SUB.TT
MENU 1 2 3
5 6 7 4
9 10/0 10 + 8
SLOW
HTS-ES1-UM1 (First Lot).qxp 2/7/08 2:29 PM Page 9