Lincoln Electric LN-25 - Manual (Page 8)

LN-25 Wire Feeder K428
LN-25 Wire Feeder w/Internal Contactor and Gas Solenoid K449
Required Options
Magnum Gas-Shielded Gun and Cable Assemblies See publication E12.10
Magnum Self-Shielded Gun and Cable Assemblies See publication E12.110
Drive Roll and Guide Tube Kits See page 6
Weld Power Cables See page 6
Twist-Mate Cable Plug:
– for 1/0-2/0 cable
K852-70
– for 2/0-3/0 cable K852-95
Cable Lug S1119-14
Recommended General Options
Jumper Plug Kit K484
Terminal Strip Remote Voltage Control Kit K444
6-Pin Remote Voltage Control Kit K444-1
14-Pin Remote Voltage Control Kit K444-2
42 Volt Remote Output Control Module K624-1
Wire Feeder Control Cable K1819-10
Wire Feeder Control Cable Extension:
25 ft.(7.6m), 50 ft.(15.2m) K1797-25, -50
Gas Solenoid Kit (standard on K449) K430-2
Internal Contactor Kit (standard on K449) K443-2
Gas Flow Timer Kit (K428 Requires K430-2) K434-1
22-30 lb. Readi-Reel Adapter K363P
14 lb. Innershield Coil Adapter K435
8” O.D. Spool Adapter K468
TOTAL:
C U S T O M E R A S S I S T A N C E P O L I C Y
The business of The Lincoln Electric Company is manufacturing and selling high quality welding equipment, consumables, and cutting equipment. Our challenge is to meet the needs of our customers and to exceed
their expectations. On occasion, purchasers may ask Lincoln Electric for advice or information about their use of our products. We respond to our customers based on the best information in our possession at that
time. Lincoln Electric is not in a position to warrant or guarantee such advice, and assumes no liability, with respect to such information or advice. We expressly disclaim any warranty of any kind, including any warranty
of fitness for any customer’s particular purpose, with respect to such information or advice. As a matter of practical consideration, we also cannot assume any responsibility for updating or correcting any such informa-
tion or advice once it has been given, nor does the provision of information or advice create, expand or alter any warranty with respect to the sale of our products.
Lincoln Electric is a responsive manufacturer, but the selection and use of specific products sold by Lincoln Electric is solely within the control of, and remains the sole responsibility of the customer. Many variables
beyond the control of Lincoln Electric affect the results obtained in applying these types of fabrication methods and service requirements.
Subject to Change – This information is accurate to the best of our knowledge at the time of printing. Please refer to www.lincolnelectric.com for any updated information.
T H E L I N C O L N E L E C T R I C C O M PA N Y
22801 St. Clair Ave., Cleveland, OH 44117-1199 • 216.481.8100 • www.lincolnelectric.com
LN-25 ORDER FORM
PRODUCT DESCRIPTION ORDER NUMBER QUANTITY PRICE