Linksys Player / Wireless-N Music Extender DMP100 - Manual (Page 39)

Using Your Player with the Controller
32 Player/Wireless-N Music Extender
Wireless Home Audio
Zones and Libraries
Rename Zone This option is used to rename a device
with a name that will allow you to know where it is located
in your home. This makes it much easier to select which
areas to play music to or link.
Rediscover If one of the Wireless Home Audio devices or
one of your libraries on the network is not appearing, use
this option to rescan for any devices or libraries that are
not showing up.
General Settings
The General option allows you to configure general
devices settings for your Director.
Date/Time
Auto update When this option is enabled, the date and
time settings are automatically updated via the Internet.
Set Time A series of screens will appear allowing you to
enter the month, day, year, and time manually.
Set Time Zone Select your local time zone.
Daylight saving This option should be selected when
observing daylight saving time.
Time Format This allows you to select a 12 hour or 24 hour
time format. The 12 hour format is the default setting.
Date Format Allows you to specify the order that the day,
month, and year are displayed.
Now Playing Screen Set Up
The Now Playing Screen can be turned OFF or set to
start after an idle period of 30 seconds, 60 seconds, or 2
minutes.
OK button Set Up
This option defines that action that will occur when the
OK button is pressed on the IR remote. The options are
the following:
Play • This is the default setting. When you highlight an
item and press the OK button on the IR remote, the
item will begin playing immediately and any existing
tracks will be cleared from the queue. If the item you
selected was an album, playlist, genre, or artist, all
tracks associated with selection will be added to the
queue. If the item selected was a track or channel, only
the single item will appear in the queue.