03 installation troubleshooting, Error messages, Handling guideline – Pioneer DEH-1300MP User Manual

Page 7: Additional information

Advertising
background image

Removing the unit

1

Remove the trim ring.

1 Trim ring
2 Notched tab
! Releasing the front panel allows easier ac-

cess to the trim ring.

! When reattaching the trim ring, point the

side with the notched tab down.

2

Insert the supplied extraction keys into

both sides of the unit until they click into
place.

3

Pull the unit out of the dashboard.

Removing and re-attaching the front
panel

You can remove the front panel to protect your
unit from theft.
Press the detach button and push the front
panel upward and pull it toward you.
For details, refer to Removing the front panel to
protect your unit from theft and Re-attaching
the front panel on page 4.

En

12

Section

03

Installation

Troubleshooting

Symptom

Cause

Action

The display
automatically
returns to the
ordinary dis-
play.

You did not per-
form any opera-
tion within about
30 seconds.

Perform operation
again.

The repeat play
range changes
unexpectedly.

Depending on
the repeat play
range, the se-
lected range may
change when se-
lecting another
folder or track, or
when fast for-
warding/rever-
sing.

Select the repeat
play range again.

A subfolder is
not played
back.

Subfolders can-
not be played
when

FLD (folder

repeat) is se-
lected.

Select another re-
peat play range.

NO XXXX ap-
pears when a
display is chan-
ged (

NO T-TTL,

for example).

There is no text
information em-
bedded.

Switch the display
or play another
track/file.

The unit is mal-
functioning.
There is inter-
ference.

You are using a
device, such as a
cellular phone,
that transmits
electric waves
near the unit.

Move electrical de-
vices that may be
causing the inter-
ference away from
the unit.

Error messages

When you contact your dealer or your nearest
Pioneer Service Center, be sure to note the
error message.

Message

Cause

Action

ERROR-11, 12,
17, 30

The disc is dirty.

Clean the disc.

The disc is
scratched.

Replace the disc.

Message

Cause

Action

ERROR-10, 11,
12, 15, 17, 30,
A0

There is an elec-
trical or mechan-
ical error.

Turn the ignition
switch OFF and
back ON, or switch
to a different
source, then back
to the CD player.

ERROR-15

The inserted disc
is blank

Replace the disc.

ERROR-23

Unsupported CD
format

Replace the disc.

FRMTREAD

Sometimes there
is a delay be-
tween the start of
playback and
when you start to
hear any sound.

Wait until the mes-
sage disappears
and you hear
sound.

NO AUDIO

The inserted disc
does not contain
any playable
files.

Replace the disc.

PROTECT

All the files on
the inserted disc
are embedded
with DRM.

Replace the disc.

SKIPPED

The inserted disc
contains DRM
protected WMA
files.

Replace the disc.

Handling guideline

Discs and player

Use only discs featuring either of following two logos.

Use 12-cm disc. Do not use 8-cm disc or an adapter
for 8-cm disc.

En

13

English

Appendix

Additional Information

<QRD3059-A/N>7

Advertising
This manual is related to the following products: