Linksys SPA-941 - Manual (Page 55)

Enabling/Disabling Priority Call
Linksys SPA-941 Telephone User Guide System Telephone Features 43
620-05600390
NOTE: You can pick the handset up at any time to conduct a private conversation.
Permanent Caller ID Block Release
If you chose to have your caller ID information blocked on all calls, this feature
allows your caller ID information to be sent for this call only.
Your caller ID may be required for some calls to be completed. If your call will not
be accepted without caller ID information you may get a message that the number
you called will not accept anonymous (no caller ID) calls. You may use this feature
to send caller ID information for that call only.
To allow your caller ID to be displayed on the phone you are calling:
1. Press *82.
2. Press the dial soft key or pickup the handset.
3. Dial the desired phone number.
The called number should either ring or be busy. You should not get the
anonymous call rejection message.
Priority Call
The Priority Call feature allows you to define numbers that will ring at your
telephone with a special ring that tells you this is an important call. To use this
feature, you manage a list of telephone numbers (internal or external) that cause
the priority ring to sound when a call with that caller ID appears at your telephone.
Priority Call is managed through a menu of commands activated by pressing digits
on the keypad. The commands are:
• 1 - Enable/disable feature
• 2 - Add members
• 3 - List members
• 4 - Delete members
The display area on your telephone will show the options for each menu level. For
example, if you press 4 to delete a number, the display will show:
“1=Del Num, 2=List, 3=Del All, *=Menu”.
Enabling/Disabling Priority Call
The T6000 system allows you to turn the Priority Call feature on and off (i.e., set
the feature not to use the priority ring). Disabling (turning off) the feature does not
delete your list of callers assigned to receive the priority ring.