Lennox Hearth GR-DVM80 - Manual (Page 2)

To view instruction manual for JVC software:
(ADOBE ACROBAT must be installed first)
1. Load CD supplied with the camera into your CD-ROM drive.
2. Close all open programs.
3. On the desktop double click “My Computer” icon.
4. Double click CD-ROM icon (should display LY311… underneath the icon).
5. Double click on the JVC folder.
6. Click DOCS folder.
7. Select the manual you want to read (different languages are available)
Installation of NEWSOFT software (includes 3 programs:
MR.PHOTO, PHOTOALBUM and IMAGEFOLIO) for IBM or
compatible PC with Windows 95/98/NT
Presto software is intended to process existing images in your computer (print, email or edit). It is not
possible to download images from the JVC camera directly using this software.
1. Load CD supplied with the camera into your CD-ROM drive.
2. Close all open programs.
3. On the desktop double click “My Computer” icon.
4. Double click CD-ROM icon (should display LY311… underneath the icon).
5. Double click on the NEWSOFT folder.
6. Double click on the SETUP (looks like upside-down magician hat)
7. Check “Install English version” box then click INSTALL.
8. Click on NEXT.
9. Click on YES.
10. Click on NEXT.
11. Make sure all three boxes are checked, then click NEXT.
12. Click NEXT.
13. Make sure TYPICAL is checked then click NEXT.
14. Wait without touching anything until “Presto! ImageFolio LE” will appear then choose TYPICAL
and click NEXT (it may take more then 10 seconds, depending on the computer speed).
15. Without touching anything wait again until “Presto! Photo Album V 1.5 LE setup” will appear then
choose TYPICAL and click NEXT (waiting time depends on the computer speed).
16. After “Setup is successful” click OK.
17. Choose to register your new software with NEWSOFT at that time or later and setup is completed.
2