Lennox Hearth GR-DVM80 - Manual (Page 3)

Before using NEWSOFT software please view instruction
manual supplied on the CD (there is a separate manual for
each of these three programs). To view a manual installation
of ADOBE ACROBAT is necessary. After installation is
completed click on START-PROGRAMS-MR.PHOTO GOLD
1.2 and select manual you want to read/print.
To view image transferred from the camera and saved in the
computer using MR.PHOTO:
1 . Click START then PROGRAMS then MR.PHOTO GOLD 1.2 then PRESTO! MR.PHOTO 1.2
2. After Mr.Photo opens up move cursor to top left corner until taskbar with INPUT
button appears
3. Click INPUT than ADD PHOTOS.
4. Click on plus sign by “C” than find the folder containing saved ***.jpg images you downloaded
5. To view images saved from the tape with JLIP Video Capture 3.0 you would have to
remember what folder image was saved to (images saved in the JLIP albums with file
extensions .VNA can’t be viewed here unless they were saved in separate location as single
image not an album)
So it is recommended to save images transferred with JLIP Video Capture software as a JPEG
images not an album if you want to change them in any way later on.
To download images from the tape to the computer:
1. Make sure the Computer is turned off.
2. Connect the jack call PC (DIGITAL STILL) to the COM Port (RS-232C) on the
PC using supplied cable.
3 Open the LCD Screen.
4 Set the camcorder Select Switch to “PLAY”.
5 Turn the computer on.
6 Make sure no other software is running in the background at this time.
7 Click START-PROGRAMS-JLIP VIDEOCAPTURE 3.0-JLIP
VIDEOCAPTURE 3.0
8 In JLIP VIDEO CAPTURE screen click third icon from the left (DV
CONTROLLER).
9 Select COM port that is available on your computer.
10 Click SCAN
11 After scan is completed a highlighted VCRCAMERA device should appear.
12 Click OK.
3