Lennox Hearth GR-DVM80 - Manual (Page 4)

13 Using DV CONTROLLER screen operate camcorder until desired section
appears (PLAY, FFWD, REW, PAUSE or SLOW MOTION).
14 Click CAPTURE icon (looks like camera). This can be performed while
playing the tape as well as while tape is paused.
15 Transfer takes place and SEND will be blinking on the camcorder screen.
16 Select SAVE AS by right clicking on downloaded image (to save a single
picture, choose this option if you want to use NEWSOFT software later on to
process/edit the image) or select SAVE ALBUM (if more images are to be
saved together).
Below please find instructions for installation of software as well as transfer/download images to
your computer.
--------------------------------------------------------------------------
To download stills images to the computer from the camera
Memory.
1. Make sure the Computer is turned off.
2. Connect PC cable (RS-232C) to the port on the camera called
PC (DIGITALSTILL) to the COM Port (RS-232C) on the PC.
3. Set the camcorder Select Switch to "PLAY".
4. Turn the computer on.
5. Make sure no other software is running in the background at this time.
6. Click START-PROGRAMS-MULTIMEDIA NAVIGATOR-MULTIMEDIA.
7. Click PICTURE NAVIGATOR icon
8. Click FILE-PREFERENCES-CONNECT and select COM Port cable or
infrared connection and transfer speed (baud rate should match your
computer COM Port settings, to check those access MY
COMPUTER-CONTROL PANEL-SYSTEM-DEVICE MANAGER-
PORTS –PROPERTIES)
9. Clicking on SAVE ALL will download all still images into computer.
10. Images will be saved in ALBUM folder with current # in MULTIMEDIA
NAVIGATOR/PICTURE NAVIGATOR folder.
Sincerely,
JVC
4