Lenoxx Electronics CD-208 - Manual (Page 9)

IB-CD208(LC)-WM-E-060403
CD PROGRAMMED PLAY
To change the current program
Just create a new program following the above programming procedure.
To cancel Programmed Play
Press the STOP button twice, the word PROGRAM will disappear from the
display.
8
You can make a program up to 20 tracks in the specified order you want them
to be played.
NOTE:
1. Programming can only be done in STOP mode.
2. The programmed memory will be lost if the STOP button is pressed twice, or
the alkaline batteries are exhausted or removed, or AC power is shut off, or the
CD DOOR is opened.
3. The player will stop automatically after all the programmed tracks have been
played.
1. Slide the FUNCTION switch to the MP3/CD
position. Make sure the set is in the STOP mode.
2. Press the PROGRAM button once. The letters
“ ” will flash in the display .
3. Press the SKIP/SEARCH buttons ( or ) or
10+/ALBUM button to select the tracks to be
programmed in the order that you want.
4. Press the PROGRAM button to confirm. The
programmed number 2 (example) will now show in
the display, then ready for your next selecting of
track.
5. Repeat above steps 3 and 4. You can program up
to 20 tracks.
6. After programming is finished, press the PLAY
button to start programmed play.
Programming Example
Program Number
Track Number (song number) 2
1 2
5
3
8 4
1
5
2
6
4
7
1
8
1
etc.
etc.
track number
programmed
number