Linak TWINDRIVE TD1 - Manual (Page 8)

Specifications subject to change without prior notice.
It is the responsibility of the product user to determine the suitability
of LINAK A/S products for a specific application. LINAK will at point of
delivery replace/repair defective products covered by the warranty
if promptly returned to the factory. No liability is assumed beyond
such replacement/repair.
Copyright © LINAK 05.10. MA M9-02-088-E . Chapter 16.1
TWINDRIVE™ TD1 280:
Ordering example:
1 0 0 0 0 0 0 0 0
Mains cut-off: 0 = None
1 = Mains cut-off with EU wall plug, black,
without non detachable cable 3.2 m
2 = Internal mains cut-off
IP degree:
Cable:
0
0 = Straight 3.2 m EU wall plug
3 = Straight 3.2 m UK wall plug
4 = Straight 3.2 m Japanese wall plug
5 = Straight 3.2 m US wall plug
7 = Straight 3.2 m AUS wall plug
9 = Used together with ext. mains cut-off
0 = Standard
Option: 0 = None
A = Prepared for IR connection
B = Prepared for memory and infrared
Colour:
Emerg. lowering:
Channels:
Angle footrest:
Angle headrest:
Number of motors: 0 = Standard
1 = Only 1 motor for headrest
TD
Mains voltage: 0 = 230 V
1 = 120 V
2 = 100 V
A = Standard grey RAL 7035
B = black
0 = None
1 = Emergency lowering via 9V battery
Incl. batteries
2 = Emergency lowering via 9V battery
Excel. batteries
0 = None standard
1 = 1
2 = 2 (only with memory and infrared)
0 = Standard 45 degrees
0 = Standard 68 degrees
A 0 0
Transformer: 0 = Toroidal transformer
Type:
Twist bracket:
1 = TD 1
To be ordered separately