LevelOne FCS-5030 - Manual (Page 21)

LAN Setting
If you click on “No” in the “Network Type” dialog window, you will be led to the
Network setting page. In this page, you can change the server’s IP address, subnet
mask, default gateway, primary DNS server, secondary DNS and DHCP server.
Please refer to the below page.
Network Setting for LAN
You could set up the network with DHCP or fixed IP:
1. DHCP: Check the "Get IP by DHCP Server automatically" will force the device
to renew its IP address whenever it reboots, and the related network
configuration is provided by the DHCP server.
2. Fixed IP: If you want the device to use a fixed IP, please uncheck the "Get IP by
DHCP Server automatically" checkbox and assign a valid IP address, subnet
mask, default gateway and DNS server for the device.