Software installation – LevelOne FCS-5030 User Manual
Page 9
Advertising
Software installation
At the end of the hardware installation, users can use Installation Wizard program included in the
product CDROM to find the location of the Network Camera. There may be many Network
Cameras in the local network. Users can differentiate the Network Cameras with the MAC
address . The MAC address is printed on the label which is on the bottom of the Network
Camera body. Please refer to the Quick installation guide of Installation Wizard for details.
Once installation is complete, the Administrator should proceed to the next section "Initial
Access to the Network Camera" for necessary checks and configurations.
Advertising