LevelOne FCS-5030 - Manual (Page 56)

be notified the change for the connection to be successful. For instance, when the Administrator
changes the HTTP port of the Network Camera whose IP address is 192.168.0.100 from 80 to
8888, the users must type in the web browser “http://192.168.0.100:8888” instead of
“http://192.168.0.100”.
“Secondary HTTP port” It support alternate port to access HTTP server.
“Access name for stream 1” This is the access URL of stream 1 for making connection from
client software when its codec type is JPEG.
“Access name for stream 2” This is the access URL of stream 2 for making connection from
client software when its codec type is JPEG.
Using http://<ip address>:<http port>/<access name> to make connection.
Two way audio
“Two way audio port” This can be other than the default port 5060. The user can change this
value from 1025 to 65535. After the changed, the external Two-Way audio client program must
change the server port of connection accordingly.
FTP
“FTP port” This can be other than the default port 21. The user can change this value from 1025
to 65535. After the changed, the external FTP client program must change the server port of
connection accordingly.
RTSP Streaming
“Authentication” It supports disable, basic and digest modes.
“Access name for stream 1” This is the access URL of stream 1 for making connection from
client software when the codec type is MPEG-4.
“Access name for stream 2” This is the access URL of stream 2 for making connection from
client software when the codec type is MPEG-4.
Using rtsp://<ip address>/<access name> to make connection
“RTSP port” This can be other than the default Port 554
“RTP port for video” The video channel port for RTP. It must be an even number.
“RTCP port for video” The video channel port for RTCP. It must be the port number of video RTP
plus 1.
“RTP port for audio” The audio channel port for RTP. It must be an even number.
“RTCP port for audio” The audio channel port for RTCP. It must be the port number of audio