Lexmark 6500 Series - Manual (Page 207)

ENERGY STAR
Waste from Electrical and Electronic Equipment (WEEE) directive
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European Union. We
encourage the recycling of our products. If you have further questions about recycling options, visit the Lexmark Web site at
www.lexmark.com for your local sales office phone number.
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from electronic inputs. 14.1
Copying The product is generating hard-copy output from hard-copy original documents. 13.2
Scanning The product is scanning hard-copy documents. 9.0
Ready The product is waiting for a print job. 6.9
Power Saver The product is in energy-saving mode. 3.5
High Off The product is plugged into a wall outlet, but the power switch is turned off. n/a
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is turned off, and the
product is in the lowest possible power consumption mode.
n/a
Off The product is plugged into a wall outlet, but the power switch is turned off. 0.5
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous power draws may be
substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the EPA Sleep Mode.
The Power Saver Mode saves energy by lowering power consumption during extended periods of inactivity. The Power Saver Mode is
automatically engaged after this product is not used for a specified period of time, called the Power Saver Timeout.
Factory default Power Saver Timeout for this product (in minutes): 60
207