Maintenance schedule – Land Pride Accuz Z52 User Manual

Page 33

Advertising
background image

31

Section 4 Maintenance and Lubrication

03/11/03

Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M

Land Pride

NOTES:

1.

Initial oil change is after 5 hours of operation. Thereafter, change oil after every 40 hours of operation. Change
more often under dusty or dirty conditions and during hot weather periods.

2.

Torque initially and after first 2 hours of operation.

3.

Perform initial hydraulic filter change after 50 hours (one week) of operation.

4.

Change engine oil filter per the engine manufacturer’s recommendations. Refer to Engine Owner’s Manual.

5.

Refer to Engine Owner’s Manual.

6.

Service more often under dusty or dirty conditions. Use caution when servicing to prevent dust contamination in
the engine. Do not clean filter element. Replace with a new one.

7.

Inspect every 100 hours and replace if worn or cracking is noticed. Otherwise, replace every 1000 hours or 2
years
whichever comes first.

8.

Check fuel line hoses, fuel valve and grommet for any cracks or leaks.

Maintenance Schedule

Service at Intervals Indicated

Weekly or 50 Hours

Monthly or 100 Hours

Annually or 500 Hours

Verify Safety Start Interlock System

Daily

Visually Inspect Unit for loose hardware
and/or damaged parts

Daily

Visually Inspect Tires

Daily

Check Oil Level, Engine (1)

Daily or every 4 hours

Clean Air Intake Screen

Daily or every 4 hours

Check Fuel Level

Daily

Blades - Sharpen & Securely Fastened

Daily

Discharge Chute - Securely In Place &
In Lowest Position

Daily

Replace Remote Air Cleaner paper
element (6)

As needed

Grease Deck Idler

X

Grease Deck Pusher Arms

X

Grease Pump Idler

X

Grease Deck Height Pivots

X

Grease Gauge Wheel Bearings

X

Change Engine Oil & Filter (1) (4)

X

Clean Cylinder And Head Fins (5)

X

Check Battery Connections

X

Check Tire Pressure With A Gauge

X

Check Hydraulic Oil Level

X

Clean Engine Exterior (5)

X

Clean And Re-gap Spark Plugs (5)

X

Check Pump Belt and Deck Belt
for Tension and Condition (7)

X

Check Fuel And Hydraulic Lines (8)

X

Check Fuel Valve And Grommet (8)

X

Change Fuel Filter

X

Clean Or Replace Hydraulic Fill Cap

X

Change Hydraulic Filter And Oil (3)

X

Grease Deck Spindle Housings

X

Replace Spark Plugs

X

Advertising
This manual is related to the following products:

Z60, Z72