Land Pride Accuz Z52 - Manual (Page 43)

41
Section 5 Specifications and Capacities
03/11/03 Z52®, Z60® & Z72® Zero Turning Radius Mowers Accu-Z 356-005M
Land Pride
ACCESSORIES
Mulch Kit
Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces
handling of clippings, improves appearance, and recycles nutrients back into the soil.
Accu-Vac Collection System
Four blade impeller running off right hand deck spindle, 2 each 30 gallon rubber containers, 8.0 cu/ft. (10 bushel)
capacity, 6” reinforced hose, latched hood with gas filled lift support, three pin quick dismount of total unit, 100 lb. weight
kit. Adds 1 3/16” width to existing Accu-Z. Adds 24” to rear of Accu-Z. Accu-Vac length: 31”, Width: 34”, Height: 41 7/8”
Lift Jack Kit
Easy to mount screw jack to lift mower enough to perform blade removal/installation.
Weight Kit
100 lb. front weight kit standard with Accu-Vac Collection System.
Parking Automotive-style drum brakes.
Integral park brakes are automatically engaged when steering levers are placed in neutral.
Mower Drive Single V-belt with electric clutch and spring tension idler pulley
Safety Features Operator presence system connected to deck and drive clutches.
Stabilizer rollers rear of tractor.
Seat Standard: Molded-vinyl seat with armrests, forward adjustments, and reverse adjustment.
Optional: Molded-vinyl suspension seat with armrests, forward adjustments,
Reverse adjustments, and suspension adjustments.
Cup Holder Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size.
Hand Operated Controls Choke/throttle, ignition switch, electric mower clutch and Integrated parking brakes.
Indicators Hour meter
Engine warning light.
Cutting Heights Foot-operated deck height adjustment. Pin for setting height, transport position. Height
adjustment in 1/4" increments from 1" to 5"
Mowing Blades Heavy-duty, heat-treated, high-lift steel blades
1/4" x 2 3/4" x 17.8" 1/4" x 2 3/4" x 21" 1/4" x 2 3/4" x 24"
Blade Tip Speed 16,647 FPM 18, 30 FPM 18880 FPM
Blade Drive V-belt drive to all three spindles with spring tension idler pulleys.
Spindles Machine ductile housing, 1" diameter high carbon steel shafts and sealed ball bearings. Cast
ductile cast iron blade saddles with trash guard.
Flotation Suspended mower floats on four spring-assisted chains. 4 anti-scalp wheels are standard.
Mainframe Construction 1.5" x 3" x 3/16" rectangular steel tubing.
Drive motor mount 3/16" welded steel
Caster wheels Mounted with roller bearings on each wheel.
Front caster forks 1/2" steel.
Deck Type Free-floating mower using three blades with center blade to the front. Mower is suspended at
the corners. Includes 6 deck-mounted anti-scalp rollers to improve flotation in rolling and
uneven terrain.
Deck Lift Foot-operated deck height adjustment.
Pin for setting height, transport position.
Deck Construction 1/8” welded steel. Solid 1” X 3/8” steel bars reinforce impact areas on trim edges. 3/16” x 3/8”
in box-section reinforced front edge. Reinforcements welded onto spindle mount areas. Steel
deck housing is 5” deep to provide room for high-capacity mowing.
General Specifications
Z52 Z60 Z72