Logic 3 V5.00 - Manual (Page 59)

Live Resolution
This is the resolution of the image that will be displayed on the Live Viewer. If you are
connecting to a 3MP IP camera, the resolution is much higher than your monitor is
capable of displaying, so it makes sense to reduce the resolution to minimize CPU
usage.
User / Password
The user name and password to connect to the camera. The default values are
automatically entered.
Recompress
This will recompress the image using our AZTECH codec and resize the image to
352x240 before saving. This is an extremely CPU intensive setting. The change of
resolution may impact the detail of the original picture.
Fast
Decompression
If the JPG image provided by the HTTP camera supports fast decompression, select this
option to significantly reduce the number of CPU cycles needed for rendering the
network camera feed.
Warning:
Not all network cameras support fast decompression. Disable
“Fast Decompression” if the image does not display or appears distorted when this
feature is enabled.
2.1.5.1 DVR Network Camera Type
You can connect to another DVR in the same way you would connect to an IP camera and display any camera
that it currently receives. This allows you to relay analog video from one recording DVR to a second
recording DVR.
To set up this configuration, select the Network Camera Type Vigil DVR. The recommended settings for this
setup are:
3xLogic Vigil System Server Software - User’s Guide Doc# 08100610 Page 59