Logic 3 V5.00 - Manual (Page 62)

Trigger Blocks Determines how many blocks of the image must change to count as motion.
Motion
Sensitivity
Adjust the “Motion Sensitivity” slider to control the amount of motion required to trigger
recording. Use a very sensitive setting to detect almost all motion, or a less sensitive
setting to require only very large movements to trigger recording.
2.1.6.2 Scheduled Recording
If you selected Schedule from the “Recording Mode” drop-down list, the “Schedule” window will appear. To
edit an existing schedule click the “…” button to open the “Schedule” window.
To modify the schedule, click the appropriate recording type button then click and drag across the desired
time slot. Areas that are blank (no color) have no recording modes defined for that time and will not record
any footage.
Sets or changes section to constant recording mode. Time periods are coloured green
when set to constant record.
Sets or changes section to motion recording mode. Time periods are coloured blue when
set to motion record.
3xLogic Vigil System Server Software - User’s Guide Doc# 08100610 Page 62