Print troubleshooting, Improving print quality, Photo does not print – Lexmark P200 User Manual
Page 24: Improving print quality photo does not print, Photo does not print s
Print troubleshooting
Improving print quality
If you are not satisfied with the print quality of a photo, make sure you:
•
Use the appropriate paper for the photo. For best results, use Lexmark Perfectfinish Photo Paper or Lexmark Photo
Paper.
Note: Do not use Lexmark Premium Photo Paper. Your print cartridge is not compatible with this type of paper.
•
Load the paper with the glossy or printable side facing you. (If you are not sure which side is the printable side,
see the instructions that came with the paper.)
•
Select Photo as the print quality.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects. For
best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at least 24
hours before stacking, displaying, or storing.
If the photo still does not have the print quality you want, follow these steps:
1
Align the print cartridge. For more information, see “Aligning the print cartridge” on page 19.
If print quality has not improved, continue to step 2.
2
Clean the print cartridge nozzles. For more information, see “Cleaning the print cartridge nozzles” on page 20.
If print quality has not improved, continue to step 3.
3
page 17 and “Installing the print cartridge” on page 17.
If print quality has not improved, continue to step 4.
4
contacts” on page 20.
If print quality is still not satisfactory, replace the print cartridge. For more information, see “Ordering supplies”
Photo does not print
S
OLUTION
1
If an error message is displayed, see “Error messages troubleshooting” on page 27.
S
OLUTION
2
If the light is not on, see “Power button is not lit” on page 22.
S
OLUTION
3
Remove and then reload paper. For more information, see “Loading paper” on page 12.
Lexmark Confidential until announced
Troubleshooting
24