Lexmark P200 - Manual (Page 27)

S
OLUTION
4
Check the cable connections.
1 Check the USB cable for any obvious damage.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the
USB symbol.
Error messages troubleshooting
These messages appear on your computer screen.
Cartridge Alert
The print cartridge needs to be replaced soon. The Cartridge Alert warning occurs when a cartridge is 25 percent full,
15 percent full, and five percent full.
Replace the print cartridge with a new cartridge. For more information, see “Removing a used print cartridge” on
page 17 and “Installing the print cartridge” on page 17.
To order supplies, click Order Ink on your computer screen. You can also see “Ordering supplies” on page 21 in this
guide.
Paper Jam
For more information, see “Jams and misfeeds troubleshooting” on page 26.
Out of Paper
The printer is out of paper in the middle of a print job. The button on the printer blinks.
1 Load paper. For more information, see “Loading paper” on page 12.
2 Press the blinking button on the printer.
Cartridge Stall
1 Open the access cover.
2 Make sure:
• There are no objects blocking the path of the print cartridge carrier.
• The cartridge carrier lid is snapped into place.
3 Close the access cover.
4 Press .
5 Print again.
Lexmark Confidential until announced
Troubleshooting
27