Partial photo prints, Jams and misfeeds troubleshooting, Paper jam in the printer – Lexmark P200 User Manual
Page 26: Paper jam in the paper support, Device troubleshooting, Device cannot be inserted, Nothing happens when a device is inserted, Nothing happens when a device is inserted s
Partial photo prints
The flash drive or Pictbridge-enabled camera you inserted is empty or contains files that cannot be read by the printer.
S
OLUTION
1
Use another flash drive or Pictbridge-enabled camera.
S
OLUTION
2
Make sure the paper size being used matches the size you selected.
Jams and misfeeds troubleshooting
Paper jam in the printer
1
Firmly grasp the paper, and gently pull it out.
2
Press .
3
Print again.
Paper jam in the paper support
1
Firmly grasp the paper, and gently pull it out.
2
Press .
3
Print again.
Device troubleshooting
Device cannot be inserted
Make sure that the type of flash drive, camera cable, or Bluetooth adapter you are using can be used with the printer.
For more information, see “Connecting photo storage devices” on page 13.
Nothing happens when a device is inserted
S
OLUTION
1
Remove and reinsert the flash drive, USB camera cable, or Bluetooth adapter quickly.
S
OLUTION
2
For more information, see “Connecting photo storage devices” on page 13.
S
OLUTION
3
Check that there is no obvious damage to the flash drive, PictBridge-enabled camera, or Bluetooth adapter.
Lexmark Confidential until announced
Troubleshooting
26