Lennox Hearth Winslow (PS40) - Manual (Page 15)

15
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
Door Grill Installation Instructions
Parts Needed:
Qty
(4) Button Head Screws (already in place in stove)
Tools Required:
Qty
(1) 1/8” allen wrench
To install the Grill:
1. Remove the four button head screws from body of the stove with a
1/8” allen wrench. See Figure 29.
2. Pull the scraper rod out, rotate the grill vertically, (with the notch to
the left) and slide the grill over the scraper rod (slide the rod between
the third and fourth bar). See Figure 30.
3. Rotate the grill back to the horizontal position and re-install the four
button head screws through the two holes at each end of the grill and
into the stove body. See Figure 31.
Figure 30
Figure 31
Figure 32
Figure 29
Rotate Grill Back To Horizontal Position
Slider Rod
Between 3rd and 4th Bar
Notch
Re-install Button Head Screws
Button Head Screw