Lanzar Car Audio SD43MU - Manual (Page 15)

14
7. APS/DISP BUTTON
Automatic Memory Function:
Program Scan Function:
Display ON/OFF Function:
In Radio mode, press the APS/DISP button for about 2 seconds to active
automatic station storage.
In Radio mode, press the APS/DISP button to scan and play briefly all the preset
sations in order, and it will hold at each band for about 5 seconds .
In Disc mode, press the APS/DISP button to turn off the display image
(the monitor on the unit only) , the sound will stay on. (Swing it again to resume
the playback picture mode.) You can press SEL button briefly to select the
“BG COLOR” by repeatedly pressing the SEL button, then press the VOL+/- to
select the background color among of the “AUTO, BG COLOR: 01........
BG COLOR: 11”, in “ AUTO” mode, the monitor of unit will change the
background color automatically.
8. MU (MUTE) BUTTON
Press this button briefly to turn off the audio. Press again to restore the volume to
prior level. You can also disable the MUTE function by turning the VOL +/- knob.
9. ANGLE (Screen position)
This button allows you to change the angle of the screen module in four steps.
Press this button repeatedly to cycle through the different positions.
Control Panel
10. /CH 1-6 BUTTON (RADIO PRESET)
a). In Disc Playback Mode
Press this button to pause playback, press it again to resume playback.
b). In Radio Mode
Press this button repeatedly to preset station. With this system a total of 30
stations can be stored in the memory .
The operation as below:
- store in memory
press and hold the desired memory location for several seconds, the current
listening station will be stored into the number location.
- retrieve a preset station
press it button repeatedly to retrieve a station which had been stored in the
memory in advance the chosen number is shown on display.
11. / BUTTONS (TUNE, SEEK, TRACK, SKIP UP/DOWN)
a) In DISC, USB mode:
if you wish to jump forwards or backwards press the or button .
(In DVD mode, press the button continually twice to skip back one track
during playback.)
Note:For some VCD 2.0 dics(PBC-playback control),
and buttons may
be unavailable.