Lanzar Car Audio SD43MU - Manual (Page 21)

Radio Operation
Automatic Memory Storing &
Program Scanning
Loud Function
Touch the LUD section on the
touch screen to switch the
LOUND ON or OFF.
LUD
EQ Function
Touch the DSP section repeatedly
on the touch screen to select the
EQ (pop/rock/jazz/classic/flat)
DSP
Select Audio Mode
Touch the SEL section repeatedly
on the touch screen to select the
desired item(volume/bass/treble/
balance/fader)
SEL
Select BG Color Function
Touch the SEL section briefly on
the touch screen to select the
“BG Color” by touching repeatedly
the SEL button , then touch the
VOL+/- (or press the VOL+/- on
the front panel) to select your
desired Background Color .
SEL
Buzzer Function
Touch the SEL section on touch
screen repeatedly to switch the
Buzzer ON or OFF by using the
VOL+/- .
SEL
20
Touch it to select the other item .
In Radio mode, touch the APS
section or press the APS/DISP
button on panel , the radio briefly
plays all the preset stations of the
frequency band .
Scan Function
APS
1 2 3 MOD
6 4 5 BND
ST DX DISC-IN
CH
6
SWF POP 11:08 AM
FM1 98.10
MHZ
SWF LUD DSP CLK APS
VOLUME- SEL VOLUME+
Rock 03
ST
In Radio mode, touch the ST
section on screen (or press MO/ST
button on remote ) to select mono
or stereo mode. you can sometimes
improve reception of distant
stations by selecting mono
operation .
ST
Mono/Stereo Function
Mute Function
Use your finger touch the “ ”
section , it will mute the sound
but the disc continues playing.
Touch it again to resume .
Automatic Preset Setup
In Radio Mode, Touch the APS
section and keep on the touch
screen(or press and hold the APS/
DISP button on panel ) for about 2 APS
seconds to active automatic station
storage. The radio searches within the
current frequency band, e.g. FM1, for
the stronger signal level until the search
cycle has finished . The six strongest
stations are then allocated to the
corresponding storage locations . Then
the station of the first storage location
is set .