Lenovo THINKCENTRE 8177 User Manual
Page 108
Advertising
3.
Disconnect
the
signal
and
power
cables
from
the
failing
drive.
Note:
Take
note
of
the
location
of
any
cables
you
disconnect.
You
might
have
to
disconnect
cables
to
other
drives
to
gain
access
to
the
drive
you
are
removing.
4.
Remove
the
screws
that
secure
the
drive
being
removed.
Note:
The
hard
disk
drive
has
four
screws;
two
at
the
side
of
the
drive
and
two
on
the
bottom.
5.
If
removing
the
hard
disk
drive,
remove
the
cover
on
the
front
of
the
drive.
6.
Slide
the
drive
out
the
front
of
the
computer.
102
Hardware
Maintenance
Manual
Advertising
This manual is related to the following products: