Hide gps feature, Initialize gps – Lowrance electronic Lowrance Fish-finding Sonar & Mapping GPS LMS-520C User Manual

Page 172

Advertising
background image

162

return to the GPS Simulator menu, highlight the

S

TEER WITH

A

RROWS

command, press

ENT

.

Press

EXIT

repeatedly to return to the previous

page.

Simulating Trail or Route Navigation
In Simulator mode, your unit can automatically follow a trail or route

without manual steering if you use these steps:
1. From the Map Page, go to the simulator menu. Pick a

S

TARTING

P

OSI-

TION

at or near the beginning of your trail/route. Enter an approximate

T

RACK

(shown in compass degrees) that will point you toward the start

of the trail/route.
2. Set

S

PEED

to zero. Select

S

TEER WITH

A

RROWS

command and press

ENT

,

which turns on the simulator and returns you to the Map Page.
3. Begin navigating along the trail/route. (If you are close enough to the

first waypoint, the arrival alarm will usually go off as soon as naviga-

tion begins. Press

EXIT

to clear the alarm.) When navigation starts,

press

↑ to increase speed to the desired setting.

4. Press

EXIT

to turn off the steering and speed boxes. The unit will now

automatically steer along the trail or route. Cancel navigation when

you arrive at your destination.

Hide GPS Feature

If there is no GPS antenna/receiver module attached to this unit, the

GPS menus and features can be hidden from view with this command.

The default setting is off, allowing you to rotate between the Sonar

Page and the GPS pages and features.
To Hide GPS Features:
1. Press

MENU

|

MENU

|

↓ to

S

YSTEM

S

ETUP

|

ENT

.

2. Highlight

H

IDE

GPS

F

EATURES

and press

ENT

. The GPS menus and

pages are now hidden.
To restore GPS Features, press

MENU

|

MENU

|

↓ to

S

HOW

GPS

F

EA-

TURES

|

ENT

. The GPS menus and pages are available once again.

Initialize GPS

This command is handy when you are practicing in simulator mode. (See
the entry in this section for GPS Simulator.) In simulator mode, this

command makes the unit operate as if it is sitting someplace other than

its actual location. So, you and your unit could be located in Kansas City,

but easily practice navigating in the ocean off Islamorada, Florida.

www.Busse-Yachtshop.de email: [email protected]

Advertising
This manual is related to the following products: