Lexmark 9300 Series - Manual (Page 116)

2 From the control panel, press or repeatedly until Copy is highlighted.
3 Press .
The Copy Mode menu appears.
4 Press or repeatedly until 2-Sided Copies is highlighted.
Note: The 2-sided Copies option appears only if there is a duplex unit installed.
5 Press or repeatedly until the option you want appears. Choose 1-Sided Original, 2-Sided Copy (if
you are copying a one-sided document) or 2-Sided Original, 2-Sided Copy (if you are copying a two-sided
document).
6 Press .
7 Press .
Collating copies
If you print multiple copies of a document, you can choose to print each copy as a set (collated) or to print the copies
as groups of pages (not collated).
Collated Not collated
1 Load paper.
2 Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the Automatic Document Feeder (ADF). Place these items on the scanner glass.
3 From the control panel, press or repeatedly until Copy is highlighted.
4 Press .
The Copy Mode menu appears.
5 Press to reach the Copies menu item.
6 Press or repeatedly until the number of copies you want to print appears.
7 Press repeatedly until you reach the Collate menu item.
8 Press or repeatedly until On appears.
9 Press
Note: If you are using the scanner glass, a message appears prompting you for additional pages.
116