Listen Technologies PS 6000 - Manual (Page 12)

Danish Interpretation Systems User Manual
Manual 01 18 04450 12
MU 6040 C/D without connected loudspeaker
This table shows the maximum number of MU
6040 Microphone Units, which can be connected.
The numbers are with no audio in loudspeaker (no loudspeaker connected to each unit). If
loudspeakers are used, then use the figures for
CM/DM 60x0 above.
Length of Feeding Cable,
Type CAT5 AWG24
Cable length between
each MU 6040
Total cable length Max. number of
MU 6040
10 m 2 m 168 m 80
30 m 2 m 178 m 75
50 m 2 m 188 m 70
100 m 2 m 200 m (202 m) 51 (52*)
150 m 2 m 200 m (232 m) 26 (42*)
100 m 1 m 151 m 52
150 m 1 m 191 m 42
Numbers in (‘) are the number of units, which could
have been connected CU/EX, but where the total number of units has been lowered due to the
restriction of the maximum length of cable (200 m).
IS 6132P Interpreter Units
This table shows the maximum number of IS 6132P
Interpreter Sets, which can be connected. The
numbers are with no audio in loudspeaker (no
loudspeaker connected to each unit).
If loudspeakers are used, then use the figures for
CM/DM 60x0 above.
Note: The number of units is dependant of how
many interpreter sets there are per booth (or
language), as there only can be one set switched ON
per language (channel).
Length of Feeding Cable,
Type CAT5 AWG24
Length of inter-connecting Cables,
Type CAT5 AWG24
Max. number of units pr output
All ON ½ ON 1/3 ON
10m 2 m 54 x x
30m 2 m 49 57 60
50m 2 m 44 51 x
100m 2 m 35 40 x
150m 2 m 25 30 x