Lexmark 8300 Series - Manual (Page 14)

Installing another language control panel
These instructions apply only if you received one or more additional language control panels with the
printer.
1 Lift and remove the control panel (if one is installed).
x
2 Choose the correct control panel for your language.
3 Align the clips on the control panel with the holes on the printer, and then press down.
x
Getting the printer ready to fax
You can connect the printer with equipment such as a telephone, an answering machine, or a computer
modem. If problems occur, see “Setup troubleshooting” on page 101.
Note: The printer is an analog device that works best when directly connected to the wall jack. Other
devices (such as a telephone or answering machine) can be successfully attached to pass through the
printer, as described in the setup steps. If you want a digital connection such as ISDN, DSL, or ADSL, a
third-party device (such as a DSL filter) is required.
You do not need to attach the printer to a computer, but you do need to connect it to a telephone line to
send and receive faxes.
You can connect the printer to other equipment. See the following table to determine the best way to set
up the printer.
Equipment Benefits See this section
• The printer
• A telephone cord
Send and receive faxes without using a
computer. “Connecting directly to a
telephone wall jack” on page 15
14