Lexmark 8300 Series User Manual
Page 58
Using a PictBridge-enabled digital camera to control printing
photos
Connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select
and print photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2
Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
•
Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more
information, see the camera documentation.
•
The printer reads only one media device at a time.
3
Follow the instructions in the camera documentation to select and print photos.
Warning: Do not remove cables or media devices, or touch the printer while the light is blinking in
the area shown.
58