Lucent Technologies MDW 9000/9010 - Manual (Page 21)

19
Reminders␣
To program:
See Programming Buttons & Settings, p. 22.
The Reminders feature allows you to set a time when your phone will ring like an alarm clock. Once
your phone rings as an alarm, the reminder is canceled. You can set only one alarm at a time and it
must be for the day you set it.
Often-Used Features
To set a reminder:
1. Turn the phone on and press the Reminder
Set button you have programmed,
OR
Press
# or the programmed Feature button
and dial 81.
2. Dial a 4-digit time from 0100 to 1259.
3. Dial 2 (letter A on dialpad) for a.m. or 7
(letter P on dialpad) for p.m.
To cancel a reminder:
Press the Reminder Set button you have
programmed,
OR
Press
# or the programmed Feature button and
dial ✻81.
Saved Number Dial␣
Must be programmed on a button. To program:
See Programming Buttons & Settings, p. 22.
Use this feature to redial a busy or unavailable number you want to try later.
To use:
1. Before pressing the On/Off button to hang up, press the Saved Number Dial button you have
programmed.
2. To redial call, press the same type of button used to place the call (for example, ICOM, Pool, or SA).
3. Press the programmed Saved Number Dial button to redial.
System Speed Dial␣
To program:
See Programming Buttons & Settings, p. 22.
Your system manager creates System Speed Dial codes (600–729) for numbers that people in your
company dial often. You can dial these directly (turn the phone on, press # or the programmed
Feature button, and dial the code) or program often-used codes on line buttons.