Little Wonder 8160 - Manual (Page 3)

2.
PACKAGE LID
DISCHARGE CHUTE
PARTS BOX:
(2) HOSE BANDS (720333.17)
(2) HOSE CLAMPS (720105)
(1) HOSE FLANGE ASSEMBLY (720101.17)
(1) FLANGE CLAMP PLATE (720253.10)
(1) LITERATURE PACKAGE
(1) WARRANTY CARD
(1) HARDWARE BAG (720531):
(1) 910131 - KNOB, MALE THREAD 5/16-18, Red
(2) 38524 - KNOB, FEMALE THREAD 3/8-16, Black
(4) 64229-03- LOCK NUT, 3/8-16
(4) 64163-31 - FLAT WASHER, 3/8"
(2) 64229-02- LOCK NUT, 5/16-18
(2) 64123-61- BOLT, 5/16-18 x 1 3/4"
HOSE 10" (720106)
BOOM
NOZZLE ASSEMBLY
PACKAGE
PALLET
TRUCK LOADER
Packaging
P/N 910609
Warning Label
Caution:
Thrown
objects.
Keep
bystanders
away.
Always wear
eye and ear
protection.
Before
performing any
service or
maintenance,
disconnect
spark
plug wire.
Make sure
throttle is in
STOP position.
Read and
understand
the Owners
Manual. Store
your Owners
Manual in a
safe place.
Keep hands
and feet
away from
air discharge
areas.
Rotating fan
will cause
serious injury.
Safety and Warnings
A. Safety Decals
An important part of the safety system incorporated
in this Shredding TruckLoader are the warnings and
informational decals (labels) found on various parts of
the unit.
These decals (labels) must be replaced if they become
illegible due to abrasion, etc.
It is your responsibility to replace the decals (labels)
when they become hard to read. The location of these
decals and their part numbers for ordering are shown on
the picture below.
WARNING DANGER
IMPROPER USE OR CARE OF THIS SHREDDING
TRUCKLOADER, OR FAILURE TO WEAR PROPER
PROTECTION CAN RESULT IN SERIOUS INJURY.
READ AND UNDERSTAND THE RULES FOR
SAFE OPERATION AND ALL INSTRUCTIONS
IN THIS MANUAL.
WEAR HEARING, EYE, AND BREATHING
PROTECTION.