Little Wonder 8160 - Manual (Page 5)

4.
General Safety Rules
1. Read and understand manual.
2. Wear eye, hearing, and breathing protection, proper
clothing and footwear.
3. While operating the machine always be sure of a
safe and secure operating position, maintain a firm
footing and good balance at all times.
4. Keep area clear of children, pets and bystanders.
5. Never attempt to use an incomplete machine or one
fitted with an unauthorized modification.
6. Avoid contact with and inhalation of harmful fluids,
gases, mists, fumes, and dust.
7. Check operation of the safety interlock switch
daily. Do not defeat interlock system; it is for your
protection.
8. Do not allow children to operate machine.
9. Do not override or remove any safety devices.
12. Keep hands away from hose inlet and discharge
chute.
13. Disconnect spark plugs before doing any cleaning
or maintenance – There are two spark plugs on the
machine. Disconnect both.
14. If the Shredding TruckLoader is mounted on a trailer,
make sure that the driver of the towing vehicle has
the operator of the Shredding TruckLoader in full
view at all times.
15. When operating the Shredding TruckLoader, operator
must stay to the side of the machine, never in front or
behind
16. Wear gloves to protect your hands.
17. Beware that the machine is loud and, during normal
operation; may interfere with speech communication.
18. Check mounting hardware daily! When Shredding
TruckLoader is attached to the Swing Away Hitch
Mount, A-frame, or Tailgate, or other mounting
option, beware of the possibility that the machine
may overturn, fall, or tip over because of unexpected
movement of the vehicle.
A. Warnings - “Don’ts”
Don’t attempt to remove materials from intake or
discharge when Shredding TruckLoader is running, or
fan is rotating.
Don’t install or remove components while Shredding
TruckLoader is running. Turn off engine to make
changeover. Be sure throttle is in the stop position, and
the Shredding TruckLoader has come to a complete
stop. Remove the spark plug wires from the spark plug
before removing material.
Don’t point the Shredding TruckLoader discharge chute
in the direction of people, cars, glass, or other similar
items which could be injured or damaged by blown
debris.
Don’t attempt to repair Shredding TruckLoader.
Have repairs made by qualified Little Wonder dealer
or repairman. See that only Little Wonder and
recommended engine manufacturers replacement parts
are used.
Don’t leave the engine running while the Shredding
TruckLoader is unattended.
Don’t store, spill, or use gasoline near flames or spark.
B. Warnings - “Do’s”
Always dress properly. Do not wear loose clothing or
jewelry. They can be caught in moving parts. Use of
sturdy gloves, non-skid footwear and safety glasses
are recommended. Always wear ear protectors where
possible. Use face filter to avoid breathing dust.
Always stay alert. Watch what you are doing and use
common sense. Do not operate Shredding TruckLoader
when fatigued.
Always keep hands away from air intake and air outlet
chute. Keep both hands on handles when power is on.
Always maintain and examine Shredding TruckLoader
with care. Follow maintenance instructions given in
manual.
WARNING DANGER
10. FAN COASTS AFTER THE ENGINE IS TURNED
OFF.
WARNING DANGER
DO NOT SMOKE WHEN FILLING FUEL TANK
WARNING DANGER
11. ROTATING FAN. DON’T ATTEMPT TO REMOVE
MATERIALS FROM INTAKE OR DISCHARGE
WHEN UNIT IS RUNNING, OR FAN IS ROTATING.
WARNING DANGER
DO NOT USE THE SHREDDING TRUCKLOADER IF
THE MUFFLER IS DEFECTIVE OR MISSING.