Lincoln Electric WELDANPOWER 125 IM530-C - Manual (Page 24)

OPERATION
– 17 – WELDANPOWER 125
TABLE B.3
AUXILIARY POWER APPLICATIONS
Suggested Power Applications Running Watts *Start-up Watts
(Continuous) (Surge)
*Air Compressor - 1 HP 2,000 4,000 - 8,000
*Air Compressor - 3/4 HP 1,250 3,100 - 5,000
*Airless Sprayer - 1/3 HP 600 1,500 - 2,400
Chain Saw 1,200
Circular Saw 1,200
Coffee Maker 1,000
*Deep Freezer 500 750 - 2,000
*Electric Motor - 1 HP 1,000 2,500 - 4,000
Electric Range (1 element) 1,500
Electric Skillet 1,250
*Furnace Fan - 1/3 HP 1,200 3,000 - 4,800
Portable Grinder (4 1/2”) 600
Portable Grinder (7”) 2,000
Halogen Work Light 500
Hand Drill - 1/4” 500
Hand Drill - 3/8” 700
1500 Watt Heater 1,750
Hedge Trimmer 450
Light Bulb 100
Reciprocating Saw 900
Radial Arm Saw 2,600
Radio 50
*Refrigerator/Freezer (small) 600 1,500 - 2,400
Slow Cooker 200
*Submersible Pump - 1 HP 1,000 2,500 - 4,000
*Sump Pump 600 1,500 - 2,400
Toaster 1,100
Weed Trimmer 500
Lincoln Wire Feeder/Welder 4,000
NOTES:
Wattages listed are approximate. Check your equipment for actual wattage.
Equipment with unusually high *START-UP WATTS are listed. For start-up of other equipment that uses
a motor, listed in the table, multiply RUNNING WATTS by 2.
(For Codes 10158, 10160)
Multiple loads can be used as long as the total load does not exceed 4,500 watts. Be sure to start the
largest loads first.
(For Codes 11183, 11406)
Multiple loads can be used as long as the total load does not exceed 5,500 surge watts or 4000
continuous watts . Be sure to start the largest loads first.