Lanier 1027 User Manual
Page 155
Cover/Slip Sheet
143
2
❒ In "Cover" of the User Tools (Sys-
tem Settings), if you selected
"Mode Selected" for the "Tray Dis-
play" setting, the machine refers to
the settings in "Cover" about
whether the front and back covers
are copied single-sided ("1 Sided
Only") or double-sided ("Duplex
Copy"). If you selected "Display
Always" for "Tray Display", the
machine refers to the settings in
"Special Paper Indication" about
whether the front and back covers
are copied single-sided ("1 Sided
Copy") or double-sided ("Duplex
Copy").
⇒ "Special Paper Indica-
tion" and "Cover" in the System
Settings manual
❒ When you use this function with
Combine mode, you can specify
whether to combine the front cover
or not.
⇒ "Front Cover Copy in
Combine" on p.196 “Edit
2
/
2
”
AAAA
Press the [Cover/Slip Sheet] key.
BBBB
Press the [Front Cover] key.
CCCC
Select [Copy] or [Blank] for the cov-
er sheet.
DDDD
Select the paper tray containing
the non-cover sheet paper, and
then press the [OK] key.
EEEE
Place your originals in the docu-
ment feeder, and then press the
{
{
{
{
Start
}
}
}
}
key.