Lanier 1027 User Manual
Page 71
Copying from the Paper Tray 2
59
2
B
B
B
B
Press the [Vertical inch] key, en-
ter the vertical size of the paper
with the number keys, and
then press the
{
{
{
{
#
}
}
}
}
key.
Note
❒ To change the number en-
tered, press the [Clear] or
{
{
{
{
Clear/Stop
}
}
}
}
key and enter
the new number.
C
C
C
C
Enter the horizontal size of the
paper with the number keys,
and then press the
{
{
{
{
#
}
}
}
}
key.
Note
❒ If the [Horiz inch] key is not
highlighted, press the [Horiz
inch]
key.
❒ To change the number en-
tered, press the [Clear] or
{
{
{
{
Clear/Stop
}
}
}
}
key and enter
the new number.
D
D
D
D
To register the custom size en-
tered, press the [Program] key
and then press the [Exit] key.
Note
❒ If you do not register the cus-
tom size, go to step
B
.
❒ Only one custom size can be
stored.
❒ To recall the custom size
stored, press the [Recall] key.
❒ If you do not register the cus-
tom size, the size you set is
deleted wh en modes are
cleared.
When copying onto special paper
To make copies onto special paper
(OHP transparencies, thick paper
(for example postcards and enve-
lopes), thin paper, label paper (ad-
hesive labels)), specify the paper
type in "Special paper".
Note
❒ If [2 Sided] is selected for copy-
ing in [Dup./Combine/Series] (for
example [1 Sided]
→[2 Sided]), se-
lect [1 Sided] for copying (for ex-
ample [1 Sided]
→[1 Sided]).
❒ Select [Thick Paper] if the paper
weight is 105g/m
2
(28 lb.) or
more.