Lanier 1027 - Manual (Page 100)

Copying
88
2
Duplex
The optional Duplex unit is required to use this function.
This function can be used in two
ways:
❖ ❖ ❖ ❖ 1 Sided → → → → 2 Sided
This mode makes two-sided copies
from one-sided originals.
❖ ❖ ❖ ❖ 2 Sided → → → → 2 Sided
This mode makes two-sided copies
from two-sided originals.
Limitation
❒ You cannot use the following copy
paper with this function:
• Paper smaller than A5
K , 5 1 /
2
"
× 8 1 /
2
" K (possible on A5 L ,
5 1 /
2
"
× 8 1 /
2
" L )
• Paper thicker than 90g/m 2 , 24
lb.
• Paper thinner than 64g/m 2 , 20
lb.
• Translucent paper
• Label paper (adhesive labels)
• OHP transparencies
• Postcards
❒ You cannot use the bypass tray
with this function.
❒ The function might not work for
certain types of large size originals
(such as A3, 11"
× 17"). In this case,
an optional 32MB memory or
HDD is required.
1 Sided
→ → → → 2 Sided
Note
❒ If you set an odd number of 1-sid-
ed originals in the document feed-
er, the reverse side of the last page
is left blank.
❒ When original images are copied,
the images are shifted by the width
of the binding margin. You can ad-
just the binding margin or binding
position. You can also change their
default values.
⇒ "Front Margin:
L e f t / R i g h t " , " B a c k M a r g i n :
L e f t / R i g h t " , " F r o n t M a r g i n :
Top/Bottom " and "Back Margin:
Top/Bottom" on p.194 “Edit
1 /
2
”
❒ By default, a binding margin is
made on the back side. You can
change the value of this setting.
⇒
"1 sided
→ 2 sided Auto Margin: T
to T" on p.194 “Edit 1 /
2
”
1 2
2
1