Lanier 1027 - Manual (Page 121)

Series/Book
109
2
Copying Book Originals
Limitation
❒ You cannot use the bypass tray
with this function.
❒ The function might not work for
certain types of large size originals
(such as A3, 11"
× 17"). In this case,
an optional 32MB memory or a
HDD is required.
Note
❒ The machine sets the reproduction
ratio automatically to meet the pa-
per size and copies the originals to-
gether onto the paper.
❒ The machine uses ratios in the
range of 25 to 400% (25-200% when
placing originals in the document
feeder).
❒ If the calculated ratio is under the
available minimum ratio, it will be
adjusted to the minimum ratio.
However, with some ratios, parts
of the image might not be copied.
❒ If the direction of originals is dif-
ferent from that of the copy paper,
the machine will automatically ro-
tate the image by 90
° to make cop-
ies properly.
❒ If the number of originals scanned
is less than a multiple of 4, the last
page is left blank.
❒ You can have a 3mm, 0.1" bound-
ing margin around all four edges
of the original left blank (erased).
⇒ "Erase Original Shadow in
Combine" on p.194 “Edit
1 /
2
”
1 Sided
→ → → → Booklet
Make copies in page order for a fold-
ed booklet as shown in the following
illustrations.
❖ ❖ ❖ ❖ Open to Left
❖ ❖ ❖ ❖ Open to Right
Important
❒ Before selecting this function, se-
lect "Open to left" or "Open to
right" with the User Tools.
⇒ “Ori-
entation: Booklet, Magazine” on
p.196 “Edit
2 /
2
”
Note
❒ Four originals are copied onto each
sheet of copy paper.
GCBOOK0E
4
3
2
1
4
3 2
1
GCBOOK1E
4
3
2
1
1
2 3
4