Lanier 1027 - Manual (Page 136)

Copying
124
2
Margin Adjustment
You can shift the image to the left,
right, top or bottom to make a bind-
ing margin.
Limitation
❒ If you set the margin too wide, ar-
eas you do not want to delete
might be erased.
Note
❒ You can change the width of the
binding margin as follows.
❒ The margin width default is as fol-
lows. You can change this default
setting with the User Tools.
⇒
"Front Margin: Left/Right", "Back
Margin: Left/Right", "Front Mar-
gin: Top/Bottom", "Back Margin:
Top/Bottom" on p.194 “Edit
1 /
2
”
❒ When making two-sided copies
from one-sided originals, you can
set a binding margin for the back
side pages.
⇒ "1 sided → 2 sided
Auto Margin: T to T", "1 sided
→ 2
sided Auto Margin: T to B" on
p.194 “Edit
1 /
2
”
❒ When making copies in Combine
mode, the binding margins are
made on the copies after the com-
bining is finished.
❒ When "2 Sided → 1 Sided" is select-
ed, set the binding margins for
front and back pages of the origi-
nal.
AAAA
Press the [Edit/Stamp] key.
BBBB
Press the [Margin Adjustment] key.
Metric
version 0 – 30mm (in 1mm steps)
Inch
version 0" – 1.2" (in 0.1" steps)
Metric
version • Front: 5mm Left
• Back: 5mm Right
Inch
version • Front: 0.2" Left
• Back: 0.2" Right
A A