Preset stamp – Lanier 1027 User Manual
Page 139
Stamp
127
2
DDDD
Enter the number to start count-
ing from with the number keys,
and then press the [OK] key.
Note
❒ The number can be set from 1 to
999.
❒ To change the entered number,
press the [Clear] or
{
{
{
{
Clear/Stop
}
}
}
}
key and enter the new number.
EEEE
Press the [OK] key.
FFFF
Press the [OK] key.
GGGG
Place your originals, and then
press the
{
{
{
{
Start
}
}
}
}
key.
Preset Stamp
The optional 32 MB of memory is re-
quired to use this function (if the ma-
chine is equipped with the Printer
unit, 32 MB of memory is not re-
quired). There are also some other
settings available, by installing the
optional HDD.
Limitation
❒ You cannot use the bypass tray
with this function.
❒ Only one message can be stamped
at a time.
Note
❒ One of the following eight messages
can be stamped on copies with a
frame around it: "COPY", "UR-
GENT", "PRIORITY", "For Your In-
fo.", "Preliminary", "For internal
use", "CONFIDENTIAL", "DRAFT".
❒ You can change the print page
with the User Tools.
❒ You can change the size and densi-
ty of the stamp with the User
Tools.
❒ Depending on the paper size, if
you change the stamp size, parts of
the stamp might not be printed.